PA-CX12 @DF is our high-performance nylon filament with a broad range of mechanical and chemical properties. These properties include, but are not limited to, high impact (even at low temperatures), crack & scratch resistance, food / water contact acceptable, superior chemical & weathering resistance backed by a very low water absorption and excellent dimensional stability. PA-CX12 is the perfect nylon filament for the (semi)professional print user who is looking for the perfect combination of printability and mechanical properties. PA-CX12 is one of the best solutions for industrial grade applications that need to last.
- High-performance industrial grade nylon
- Strong & Flexible
- High impact, abrasion, crack & scratch resistance
- Superior chemical & UV resistance
- Excellent dimensional stability
- Low water absorption
|Specific gravity||ISO 1183||1,02 g/cc|
|MFR 280ºC/2,16 kg||ISO 1133||15 g/10 min|
|Tensile strength at yield||ISO 527||60 Mpa|
|Strain at yield||ISO 527||8%|
|Strain at break||ISO 527||>150%|
|Tensile modulus||ISO 527||1400 Mpa|
|Flexural modulus||ISO 178||1700 Mpa|
|Flexural strength||ISO 178||90 Mpa|
|Impact strength - Charpy notched 23˚C||ISO 179||14 kJ/m²|
|Shore Hardness||ISO 868||81D|
|Moisture absorption||ISO 62||3,5%|
|melting point.||ISO 11357||250˚C|
PA-CX12 is available from stock in clear, white and black. For other colours a minimum of 40kg ± 10% is required.
PA-CX12 is available in nearly any type of packaging and labelling, but will always be supplied in a vacuum bag, due to the moisture sensitivity of Polyamides. Ask our team to help you customizing your product.
PA-CX12 needs to be dried for good 3D print results.
A standard air-circulated oven is sufficient. A guideline for drying is 2-3 hours at 110-130˚C for 100 gram (Please take care to remove the spool holding the filament as it will melt at much lower temperatures.).
Recommended temperature for heated bed is 80-100˚C or even higher.
PA-CX12 will not bond perfect to glass, but adheres well to a variety of “print stickers” and other bed adhesives.
PA-CX12 can be used on most common desktop FDM or FFF technology 3D printers.
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.