GLASSBEND @DF is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. The material is FCA (Food Contact Acceptable) approved. In short, a very diverse filament which can be used for many applications.
- 92% light transmission, so very bright
- Strong and flexible
- Very good interlayer adhesion
- No crazing when bent
- Food Contact Acceptable
- Almost no ”warping”
|Specific gravity||ISO 1183||1,01 g/cc|
|MFR 200˚C/5kg||ISO 1133||7,5 g/10 min|
|Tensile strength at break||ISO 527||26 Mpa|
|Strain at break||ISO 527||230%|
|Flexural modulus||ISO 178||1795 Mpa|
|Instr. Dart Impact|
(23˚C, 3,18mm TE)
|ASTM 3763||40,0 J|
|Shore Hardness||ISO 868||63 D|
|Light Transmission||ASTM D1003||92%|
|melting temp.||ISO 294||205±30˚C|
|vicat softening temp.||ASTM D1525||85˚C|
GLASSBEND is available from stock in clear.
For non stock colours a minimum of 40kg ± 10% is required.
GLASSBEND is available in nearly any type of packaging and labelling. Ask our team to help you customizing your product.
Recommended temperature for heated bed is ± 70-90˚C. Adhesion is possible on different surfaces.
GLASSBEND can be used on all common desktop FDM or FFF technology 3D printers.
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.